Guest Rooms Unit, "Cutting & Welding Work" details and quotes.

Please note that all quotes shown here might vary a few mm/cms 

once the technical drawings will be finalised.

Guest Rooms Unit, Plan

>>>>>>>>>>>>>>>>>

Guest Rooms Unit, West Side

2 Doors, each 2576mm x 2000mm = side wall cut 9152mm

Total cut line on this side wall is 18304mm

Corten Steel Plates 6mm thick (doors and windows frames)

Along the doors sides and upper cuts we will weld the Corten Steel Plates, NOT on the bottom side/floor level.

Therefore we will have plates in number and sizes as follows:

4x 2576mm x 450mm = m2 4,64
2x 2000mm x 450mm = m2 1,8

Total weld line on this side wall is 14304mm and the Corten plates will be in total m2/qm 6,44.

Two glass doors, each H 2576mm x W 2000mm = TL m2 10,3

This side after the two doors cut
remains with three portions of wall
2x 2576mm x 960mm = total m2 4,95
1x 2576mm x 6272mm = m2 21,11
Total m2/sqm 26,06
this figure is to be taken in consideration 
when quoting the indoor wall insulation and finishing 
and outdoor "Costanera" skin.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Guest Rooms Unit, South/West View

>>>>>>>>>>>>>>>>>>>>>>>>>>>

Guest Rooms Unit, South Side

On this side there will be no cutting and welding, the opening is the container's door itself

doubled with an inside opening glass door.

One glass door, H 2576mm x W 2118mm = TL m2 5,46

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Guest Rooms Unit, North/East Side

Like on the South side also on this side there will be no cutting and welding, the opening is the container's door itself.

doubled with an inside opening glass door.

One glass door, H 2576mm x W 2118mm = TL m2 5,46

Guest Rooms Unit, North/West Side, Door Detail.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Guest Rooms Unit, East Side

2 Doors (left and right ones in the pic), 2576mm x 1600mm = side wall cut 16704mm

1 Door (central one in the pic), 2200mm x 1000mm = side wall cut 6400mm

Total cut line on this side wall is 23104mm

Corten Steel Plates 6mm thick (doors and windows frames)

Along the doors sides and upper cuts we will weld the Corten Steel Plates, NOT on the bottom side/floor level.

Therefore we will have plates in number and sizes as follows:

4x 2576mm x 450mm = m2 4,64

2x 1600mm x 450mm = m2 1,44

Total weld line on this side wall is 6472mm and the Corten plates will be in total m2 6,08.

Two glass doors, each H 2576mm x W 1600mm = TL m2 8,24

and one steel door, H 2200mm x W 1000mm = m2 2,2

This side after the three doors cut

remains with four portions of wall 

2x 2576mm x 1500mm = total m2 7,7

2x 2576mm x 2836mm = m2 14,61

Total m2 22,31

this figure is to be taken in consideration 

when quoting the indoor wall insulation and finishing 

and outdoor "Costanera" skin.
Above the door of the technical area
(central door in the picture)
there will be no "Costanera" skin to cover the wall.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Guest Rooms Inside Walls Opening Cuts 

This unit has two large opening along the inside walls,  

one for each room,

2x 2576mm x 4356mm = Cutting line 27728mm

Total cutting line 55456

This side after the opening cuts

remains with one portion of wall 

2576mm x 3160mm = total m2 8,14

Total m2 16,28

this figure is to be taken in consideration

when quoting the indoor wall insulation.