Office Unit

This is the only unit with a single 20ft HC.

Office Unit, Plan

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Office Unit, South Side

1 Door, 2576mm x 2600mm = side wall cut 10352mm

Total cut line on this side wall is 10352mm

Corten Steel Plates 6mm thick (door frame)

All along the door sides we will weld the Corten Steel Plates, NOT on the bottom side/floor level.

Therefore we will have plates in number and sizes as follows:

2x 2576mm x 450mm = m2 2,32

1x 2600mm x 450mm = m2 1,17

Total weld line on this side wall is 7752mm and the Corten plates will be in total m2 3,49.

One glass door, H 2576mm x W 2600mm = m2 6,7

This side after the door cut
remains with two portions of wall

2x 2576mm x 1729mm = total m2 8,91

Total m2/sqm 8,91

this figure is to be taken in consideration 

when quoting the indoor wall insulation and finishing 

and outdoor "Costanera" skin.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Office Unit, North Side

2 Doors, each 2576mm x 600mm = side wall cut 12704mm

Total cut line on this side wall is 12704mm

Corten Steel Plates 6mm thick (doors frames)

Along the doors sides and upper cut line we will weld the Corten Steel Plates, NOT on the bottom side/floor level.

Therefore we will have plates in number and sizes as follows:

4x 2576mm x 450mm = m2 4,64

2x 600mm x 450mm = m2 0,54

Total weld line on this side wall is 11504mm and the Corten plates will be in total m2 5,18.

Two glass doors, each H 2576mm x W 600mm = TL m2 3,09

This side after the two doors cut

remains with three portions of wall

2x 2576mm x 2072mm = total m2 10,67

1x 2576mm x 712mm = m2 1,83

Total m2 12,5

this figure is to be taken in consideration 

when quoting the indoor wall insulation and finishing 

and outdoor "Costanera" skin.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Office Unit, East Side

No wall cutting welding and Corten frames here

this is the side with the original container door

that will be doubled with inside glass door.

One glass door, H 2576mm x W 1318mm = TL m2 3,4

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Office Unit, West Side

1 Door, 2576mm x 1318mm = side wall cut 7788mm

Total cut line on this side wall is 7788mm

Corten Steel Plates 6mm thick (door frame)

All along the door sides we will weld the Corten Steel Plates, NOT on the bottom side/floor level.

Therefore we will have plates in number and sizes as follows:

2x 2576mm x 450mm = m2 2,32

1x 1318mm x 450mm = m2 0,59

Total weld line on this side wall is 6470mm and the Corten plates will be in total m2 2,91.

One glass door, H 2576mm x W 1318mm = TL m2 3,4

This side after the door cut

remains with two portions of wall

each one 2576mm x 400mm = total m2 1,03

Total m2 2,06

this figure is to be taken in consideration 

when quoting the indoor wall insulation and finishing 

and outdoor "Costanera" skin.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>